beautypg.com

To disarm the system – Dodge 2011 Durango - Owner Manual User Manual

Page 24

background image

To Disarm The System

The Vehicle Security Alarm can be disarmed using any of
the following methods:

• Press the UNLOCK button on the Remote Keyless

Entry (RKE) transmitter.

• Grasp the Passive Entry Unlock Door Handle (if

equipped, refer to

ЉKeyless Enter-N-GoЉ in ЉThings To

Know Before Starting Your Vehicle

Љ for further infor-

mation).

• Cycle the vehicle ignition system out of the OFF

position.

• For vehicles equipped with Keyless Enter-N-Go,

press the Keyless Enter-N-Go Start/Stop button
(requires at least one valid Key Fob in the vehicle).

• For vehicles not equipped with Keyless Enter-N-Go,

insert a valid key into the ignition switch and turn
the key to the ON position.

NOTE:

• The driver’s door key cylinder and the liftgate button

on the RKE transmitter cannot arm or disarm the
Vehicle Security Alarm.

• The Vehicle Security Alarm remains armed during

power liftgate entry. Pressing the liftgate button will
not disarm the Vehicle Security Alarm. If someone
enters the vehicle through the liftgate and opens any
door the alarm will sound.

• When the Vehicle Security Alarm is armed, the interior

power door lock switches will not unlock the doors.

The Vehicle Security Alarm is designed to protect your
vehicle; however, you can create conditions where the
system will give you a false alarm. If one of the previ-
ously described arming sequences has occurred, the
Vehicle Security Alarm will arm regardless of whether

22

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

This manual is related to the following products: