beautypg.com

Electronics, Warning – Dodge 2010 Grand Caravan - User Guide User Manual

Page 46

background image

WARNING!

• Your motorized door or gate will open and close while you are programming the

universal transceiver. Do not program the transceiver if people or pets are in the
path of the door or gate.

• Do not run your vehicle in a closed garage or confined area while programming the

transceiver. Exhaust gas from your vehicle contains Carbon Monoxide (CO) which is
odorless and colorless. Carbon Monoxide is poisonous when inhaled and can
cause you and others to be severely injured or killed.

NOTE:
• Only use this transceiver with a garage door opener that has a “stop and reverse”

feature as required by Federal safety standards. This includes most garage door
opener models manufactured after 1982. Do not use a garage door opener without
these safety features. Call toll-free 1–800–355–3515 or, on the Internet, at
www.HomeLink.com for safety information or assistance.

• If you are having difficulty programming your HomeLink

®

and your garage door opener

was manufactured after 1995, you may have a rolling code. Follow the steps below for
Programming A Rolling Code System.

Programming A Rolling Code System

• At the garage door opener motor (in the garage), locate the “learn” or “programming”

button. This can usually be found where the hanging antenna wire is attached to the
garage door opener motor (it is NOT the button normally used to open and close the
door).

• Firmly press and release the “learn” or “programming” button. The name and color of

the button may vary by manufacturer. Within 30 seconds, return to the vehicle and
press the programmed HomeLink

®

button twice (holding the button for two seconds

each time). If the device is plugged in and activates, programming is complete.

• If the device does not activate, press the button a third time (for two seconds) to

complete the programming.

Using HomeLink

®

• To operate, simply press and release the programmed HomeLink

®

button and the

programmed device will operate.

• Refer to your Owner’s Manual on the DVD for further details. If you have any problems

programming HomeLink

®

, or require assistance, please call toll-free 1–800–355–3515

or, on the Internet, at www.HomeLink.com.

ELECTRONICS

44