Dodge 2010 Grand Caravan - User Guide - Manual (Page 14)

Installing The Top Tether Strap (With Either Lower Anchors Or Vehicle Seat
Belt):
• Route the top tether strap under the adjustable head restraint between the steel
posts.
• Provide enough slack for the tether strap to
reach the tether anchor located near the
bottom of the seat back.
• Clip tether hook to tether anchor. Ensure
that the hook is firmly engaged and secure.
• Remove all slack and tighten tether strap
according to child restraint manufacturer’s
instructions.
NOTE: The top tether strap is always to be
secured, regardless of if the child restraint is
installed with the lower anchors or the vehicle
seat belt.
WARNING!
Never place any child seat, booster seat, or infant carrier in the Swivel 'n Go seat while
it is in the rearward-facing position. The swivel seat should be locked in the forward
position when using any child seat, booster seat, or infant carriers, with the vehicle in
motion. Failure to do so could result in serious injury or even death.
WARNING!
An incorrectly anchored tether strap could lead to increased head motion and
possible injury to the child. Use only the anchor positions directly behind the child
seat to secure a child restraint top tether strap.
GETTING STARTED
12