beautypg.com

Keyless go™ functions, Theft alarm, To arm – Dodge 2010 Challenger_SRT - Quick Reference Guide User Manual

Page 12: To disarm, Getting started

background image

Stopping

• With the vehicle stopped, place the shift lever in NEUTRAL.

• Press the ENGINE START/STOP button once. The ignition switch will return to the OFF

position.

• If the vehicle speed is above 5 mph (8 km/h), the ENGINE START/STOP button must be

held for two seconds before the engine will shut off. The ignition switch position will
remain in the ACC position until the vehicle is stopped and the button is pressed twice
to the OFF position.

NOTE: If the ignition switch is left in the ACC position, the system will automatically
time out after 60 minutes of inactivity and the ignition will switch to the OFF position.

Keyless Go™ Functions

NOTE: The following functions are with the driver’s foot OFF the Brake Pedal/Clutch
Pedal (Transmission in PARK or NEUTRAL Position).

Starting With The Ignition Switch In The OFF Position:

• Press the ENGINE START/STOP button once to change the ignition switch to the ACC

position.

• Press the ENGINE START/STOP button a second time to change the ignition switch to

the RUN position.

• Press the ENGINE START/STOP button a third time to return the ignition switch to the

OFF position.

THEFT ALARM

To Arm

• Press the Key Fob LOCK button or the power door lock switch while the door is open.

To Disarm

• Press the Key Fob UNLOCK button and turn the ignition to the ON position.

OFF

RUN

ACC

Press

Press

Press

GETTING STARTED

10

This manual is related to the following products: