beautypg.com

Sealing a tire with tirefit – Dodge 2010 Challenger_SRT - Owner Manual User Manual

Page 330

background image

WARNING! (Continued)

TIREFIT Sealant solution contains latex. In case of

allergic reaction or rash, consult a physician im-
mediately. Keep TIREFIT out of reach of children.
If swallowed, rinse mouth immediately with
plenty of water and drink plenty of water. Do not
induce vomiting! Consult a physician immedi-
ately.

Use the gloves provided in the Accessory Storage

Compartment (located on the bottom of the air
pump) when operating the TIREFIT kit.

Sealing a Tire with TIREFIT

(A) Whenever You Stop to Use TIREFIT:

1. Pull over to a safe location and turn ON the vehicle’s
Hazard Warning flashers.

2. Verify that the valve stem (on the wheel with the
deflated tire) is in a position that is near to the ground.
This will allow the TIREFIT Hoses (6) and (7) to reach the
valve stem and keep the TIREFIT kit flat on the ground.
This will provide the best positioning of the kit when
injecting the sealant into the deflated tire and running the
air pump. Move the vehicle as necessary to place the
valve stem in this position before proceeding.

3. Place the transmission in PARK (auto transmission) or
in Gear (manual transmission) and turn OFF the ignition.

4. Set the parking brake.

(B) Setting Up to Use TIREFIT:

1. Remove the gloves from the Accessory Storage Com-
partment (located on the bottom of the air pump) and
place them on your hands.

2. Turn the Mode Select Knob (5) to the Sealant Mode
position.

328

WHAT TO DO IN EMERGENCIES

This manual is related to the following products: