Dodge 2010 Challenger_SRT - Owner Manual - Manual (Page 220)

This feature allows an iPod
௡ to be plugged into the
vehicle’s sound system through a 16–pin connector, using
the provided interface cable.
UCI supports Mini, 4G, Photo, Nano, 5G iPod
௡ and
iPhone ௡ devices. Some iPod௡ software versions may not
fully support the UCI features. Please visit Apple’s
website for software updates.
NOTE:
• If the radio has a USB port, refer to the appropriate
Uconnect Multimedia radio user’s manual for iPod or
external USB device support capability.
• Connecting an iPod௡ to the AUX port located in the
radio faceplate, plays media, but does not use the UCI
feature to control the connected device.
Connecting The iPod
ா
Use the provided connection cable to connect an iPod ௡ to
the vehicle’s 16–pin connector port located on the center
console. Once the iPod
௡ is connected and synchronized
to the vehicle’s UCI system (iPod ௡ may take a few
seconds to connect), the iPod
௡ starts charging and is
ready for use by pressing radio switches, as described
below.
NOTE:
• It may be necessary to remove the connector pin
protection cap from the 16–pin connector port, prior to
connecting the cable.
• If the iPod௡ battery is completely discharged, it may
not communicate with the UCI system until a mini-
mum charge is attained. Leaving the iPod
௡ connected
to the UCI system may charge it to the required level.
218 UNDERSTANDING YOUR INSTRUMENT PANEL