NISSAN 2013 Xterra - Owner's Manual - Manual (Page 292)

Getting the spare tire and tools
1. Fold the rear bench seat cushion forward.
Refer to “Folding the 2nd row bench seat” in
the “Safety–Seats, seat belts and supple-
mental restraint system” section earlier in
this manual.
2. Remove the jack and jacking tools.
3. Find the oval-shaped opening above the
middle of the bumper. Pass the T-shaped
end of the jack rod through the opening and
direct it toward the spare tire winch, located
directly above the spare tire.
CAUTION
Do not insert the jack rod straight as it is
designed to be inserted at an angle as
shown.
4. Fit the square end of the jack rod into the
square hole of the wheel nut wrench to form
a handle.
LCE0115 LCE0117
WCE0153
In case of emergency 6-5