NISSAN 2013 Xterra - Owner's Manual User Manual

Page 25

Components

1. Head restraint

2. Lock knob

3. Stalks

Removal

Use the following procedure to remove the head
restraints.

1. Adjust the seat or seatback as necessary.

2. Push and hold the lock knob(s).

3. Pull the head restraint up until it is removed

from the seat.

4. Store the head restraint properly so it is not

loose in the vehicle.

5. Reinstall the head restraint and properly ad-

just the seat or seatback before an occupant
uses the seating position.

Install

1. Align the head restraint stalks with the holes

in the seat. Make sure the head restraint is
facing the correct direction.

2. Push the head restraint down until it locks in

place.

LRS2079

LRS2080

LRS2081

1-8

Safety—Seats, seat belts and supplemental restraint system