Hood -9 liftgate -9 – NISSAN 2013 Xterra - Owner's Manual User Manual
Page 136

᭺
1
Pull the hood lock release handle located
below the driver’s side instrument panel. The
hood will spring up slightly.
᭺
2
Push the lever at the front of the hood to the
side as illustrated with your fingertips and
raise the hood.
᭺
3
Insert the support rod into the slot on the
underside of the hood.
When closing the hood, return the hood rod to its
original position. Lower the hood approximately
12 in (30 cm) above the latch and release it. This
allows proper engagement of the hood latch.
WARNING
● Make sure the hood is completely
closed and latched before driving. Fail-
ure to do so could cause the hood to fly
open and result in an accident.
● If you see steam or smoke coming from
the engine compartment, to avoid injury
do not open the hood.
WARNING
● Always be sure the liftgate has been
closed securely to prevent it from open-
ing while driving.
● Do not drive with the liftgate open. This
could allow dangerous exhaust gases
to be drawn into the vehicle. See “Ex-
haust gas” in the “Starting and driving”
section of this manual.
● Make sure that all passengers have
their hands, etc., inside the vehicle be-
fore closing the liftgate.
LPD0302
HOOD
LIFTGATE
Pre-driving checks and adjustments
3-9