beautypg.com

NISSAN 2008 Versa Hatchback - Quick Reference Guide User Manual

Page 5

background image

HEADLIGHT AND TURN SIGNAL CONTROL

HEADLIGHT CONTROL SWITCH
■ Turn the headlight control switch

01

to the

position to turn on the front parking, tail, license plate and
instrument panel lights.

■ Turn the headlight control switch

01

to the

position to

turn on the headlights. All other lights remain on.

FOG LIGHT OPERATION (if so equipped)

NOTE: The headlights must be on and the low beams selected for the fog lights to operate.

■ Turn the switch (inside collar)

02

to the

position to turn on the fog lights.

■ Turn the switch (inside collar)

02

to the OFF position to turn off the fog lights.

TURN SIGNAL SWITCH

■ Move the headlight control switch up or down

A

to

signal a turning direction. When the turn is completed,
the turn signals cancel automatically.

■ To signal a lane change, move the headlight control

switch up or down

B

to the point where the indicator

light begins to flash, but the headlight control switch
does not latch.

HIGH BEAM

■ Push the headlight control switch forward

C

to

select the high beam function. The blue

indicator light

illuminates. Pull the headlight switch back to the original
position to select the low beam. The blue

indicator

light goes off.

■ Pull and release the headlight control switch

D

to flash the headlight high beams on

and off.

3

WINDSHIELD WIPER/WASHER SWITCH

■ The ignition switch must be in the ON position

to activate the windshield wipers.

■ Move the lever to the following positions to

operate the windshield wipers:

1

A

Intermittent (INT) – Front wipers operate

intermittently and can be further adjusted
by twisting the time control ring

1

B

.

02

Low Speed (LO) – Continuous low-speed

operation of front wipers.

03

High Speed (HI) – Continuous high-speed

operation of front wipers.

04

Mist (MIST) – Lift the lever up for one sweep of the front wipers.

05

Rear Wipers (REAR) – Twist the end section to operate the first (INT) or second

(ON) speed settings for the rear wipers.

■ Pull the lever toward you to activate front washer fluid and several sweeps of

the wipers.

1

A

02

03

04

05

1

B

C

D

01

02

A

B

B

A