NISSAN 2008 Versa Hatchback - Quick Reference Guide User Manual

Page 14

BLUETOOTH

HANDS-FREE PHONE SYSTEM

(if so equipped)

With an overhead microphone and sound
transmitted through the audio system
speaker, the Bluetooth

Hands-Free Phone

System utilizes Bluetooth

wireless technology

and voice recognition to provide hands-free cellular
phone communication.

SYSTEM OPERATING TIPS
■ Close all windows. Surrounding noises may interfere

with system operation and performance.

■ Press the

button on the steering wheel to activate voice recognition.

■ Wait for the tone before speaking.

■ Begin speaking a command within 5 seconds of the tone.

■ To go back to the previous command, say “Go back” or “Correction.”

■ To cancel a voice recognition session, wait 5 seconds, say “Cancel” or “Quit,” or

press the

button.

■ To increase or decrease the volume of the voice prompts, press the + or – (volume)

control buttons on the steering wheel or turn the volume knob on the audio system
while the system is responding.

■ Speak in a clear and natural voice without pausing between words.

■ If the Voice Recognition system does not recognize your voice commands, train the

system using the Speaker Adaptation Mode.

■ Some commands are not available while the vehicle is in motion.

■ The “Help” command can be used in any menu to hear a list of available commands.

■ Please refer to the cellular phone manufacturer Owner’s Manual for detailed

information regarding your Bluetooth

phone.

■ For recommended phones and detailed instructions, please visit

www.nissanusa.com/bluetooth.

PAIRING YOUR PHONE

To use the hands-free feature, you need to set-up, or pair, the system to recognize your
cellular phone(s). Five Bluetooth

-enabled phones can be paired. After set-up, the system

automatically connects with a paired phone when the ignition is in the ACC or ON
position, as long as the phone is on and in the vehicle.

PAIRING PROCEDURE

NOTE: The vehicle must be stationary when pairing the phone.

1. Press the

button on the steering wheel and wait for tone.

2. Say “Setup.”

3. Wait for the tone, then say “Pair phone.”

4. Wait for the tone, then say “New phone.”

5. Initiate pairing from the phone.

■ The pairing procedure varies according to each cellular phone model. For

detailed pairing instructions and compatible phones, please visit

www.nissanusa.com/bluetooth.

Bluetooth

controls location