NISSAN 2014 Quest - Owner's Manual - Manual (Page 277)

4-94 Monitor, heater, air conditioner, audio, phone and voice recognition systems
SAA2510
Audio main operation
Push the ignition switch to the ACC or ON
position. Then, push the DISC·AUX button
repeatedly to switch to the Bluetooth
®
audio
mode. If the system has been turned off while
the Bluetooth
®
audio device was playing, push-
ing the ON·OFF/VOL control knob will start the
Bluetooth
®
audio device.
The ability to pause, change tracks, fast forward,
rewind, randomize and repeat music may be
different between devices. Some or all of these
functions may not be supported on each device.
DISC·AUX button:
When the DISC·AUX button is pushed with the
system off and the Bluetooth
®
audio device
connected, the system will turn on. If another
audio source is playing and the Bluetooth
®
audio device is connected, push the DISC·AUX
button repeatedly until the display changes to
the Bluetooth
®
audio mode.
/ Next/Previous Track and Fast
Forward/Rewind:
When the or button is pushed for more
than 1.5 seconds while a Bluetooth
®
audio file is
being played, the Bluetooth
®
audio device will
play while forwarding or rewinding. When the
button is released, the Bluetooth
®
audio device
will return to normal play speed.
When the or button is pushed for less
than 1.5 seconds while a Bluetooth
®
audio file is
being played, the next track or the beginning of
the current track on the Bluetooth
®
audio device
will be played. The multi-function controller can
also be used to select tracks when the Blue-
tooth
®
audio play mode screen is shown on the
display. (“Bluetooth audio” will be indicated on
the header of the screen.)
REPEAT (RPT), RANDOM (RDM):
To change the play mode, push the button
repeatedly and the mode changes as follows.
Normal ? Shuffle All Tracks ? Shuffle Group
? Repeat 1 Track ? Repeat All Tracks ?
Repeat Group
? Normal
Operation keys:
To operate a Bluetooth
®
audio device, select a
key displayed on the operation screen using the
multi-function controller.
Play
Select the “ ” key to start playing when
pausing. Select this key again to pause the
audio play.
Pause
Select the “ ” key to pause the Bluetooth
®
audio device. Select this key again to resume
playing.
Play Mode:
The play mode setting display will appear when
the “Menu” key is selected.
Choose the preferred play mode from the
following items.