NISSAN 2014 Pathfinder - Owner's Manual User Manual
Page 210
Menu Item
Result
Others
Select the “Others” key using the NISSAN controller. Voice Recognition, language and units setting screen will be displayed.
Comfort
Select the “Others” key using the NISSAN controller, then select the “Comfort” key. The Comfort settings screen will be displayed.
You can set the following operating conditions by selecting the desired item using the NISSAN controller. The indicator light (box at
the right of the selected item) alternately turns on and off each time the item is touched or the ENTER button is pressed. Indicator light
is illuminated—ON, Indicator light is not illuminated — OFF.
Auto Interior Illumina-
tion
Select to turn on or off the illumination of the interior lights when any door is unlocked.
Light Sensitivity
Select to adjust the sensitivity of the automatic headlights higher (right) or lower (left). After selecting the item, turn the NISSAN con-
troller or touch the “+” or “-” key to change the setting.
Light Off Delay
Select to change the duration of the automatic headlight off timer. After selecting the item, turn the NISSAN controller or touch the “+”
or “-” key to change the setting. The available delays are 0, 30, 45, 60, 90, 120, 150 and 180 seconds.
Speed Sensing Wiper
Interval
Select to turn on or turn off the wiper interval adjusted automatically according to the vehicle speed.
Selective Door Unlock
When this item is turned on, only the driver’s door is unlocked first after the door unlock operation. When the door handle request
switch on the driver’s or front passenger’s side door is pushed to be unlocked, only the corresponding door is unlocked first. All the
doors can be unlocked if the door unlock operation is performed again within one minute.
Intelligent Key Lock/
Unlock
Select to turn on or turn off the door lock/unlock function by pushing the door handle request switch.
Lift Steering Wheel on
Exit
Select to turn on or turn off the steering wheel moving upward for easy exit when the ignition switch is in the OFF position and the
driver’s door is opened. After getting into the vehicle and placing the ignition switch in the ACC position, the steering wheel moves to
the previous position.
Slide Driver Seat Back
on Exit
Select to turn on or turn off the driver’s seat moving backward for easy exit when the ignition switch is in the OFF position and the
driver’s door is opened. After getting into the vehicle and placing the ignition switch in the ACC position, the steering wheel moves to
the previous position.
Return All Settings to
Default
Select to change all the comfort systems to their default settings.
Monitor, climate, audio, phone and voice recognition systems
4-19