NISSAN 2014 Pathfinder - Owner's Manual - Manual (Page 181)

MANUAL OPERATION (if so
equipped)
Tilt and telescopic operation
Pull the lock lever
᭺
1 down:
● Adjust the steering wheel forward or back-
ward in direction
᭺
3 to the desired position.
● Adjust the steering wheel up or down in
direction
᭺
2 to the desired position.
Push the lock lever
᭺
1 up firmly to lock the
steering wheel in place.
AUTOMATIC OPERATION (if so
equipped)
Tilt and telescopic operation
To adjust the steering wheel move the switch
᭺
1
in the following directions:
● Adjust the steering wheel forward or back-
ward in direction
᭺
3 to the desired tele-
scopic position.
● Adjust the steering wheel up or down in
direction
᭺
2 to the desired tilt position.
CAUTION
For vehicles with automatic drive posi-
tioner: Failure to reset the tilt and tele-
scoping functions of the steering wheel,
after the vehicle’s battery has been dis-
charged, may prevent the steering wheel
position from being adjusted.
For vehicles with automatic drive positioner: Both
the tilt and telescopic steering operation must be
reset after the vehicle’s battery has been dis-
charged in order to prevent the tilt and telescopic
operation from locking in one position. When the
battery has been recharged or replaced, perform
the following:
● For telescopic operation: Adjust the switch
᭺
1 so the steering wheel moves to the most
forward and backward position
᭺
3 that can
be reached.
● For tilt operation: Adjust the switch ᭺
1 so
the steering wheel moves to the highest
position
᭺
2 that can be reached.
Performing these operations resets the range of
the steering wheel’s tilt and telescopic function.
LPD2111 WPD0366
3-30 Pre-driving checks and adjustments