NISSAN 2014 Murano - Quick Reference Guide - Manual (Page 14)

12
To view detailed instructional videos regarding features in this Quick Reference Guide,
please go to www.nissanownersinfo.mobi.
FIRST DRIVE FEATURES
HEADLIGHT CONTROL SWITCH
HEADLIGHT CONTROL
Turn the headlight control switch to the
position 01
to turn on the front parking, side
marker, tail, license plate and instrument panel
lights. Turn the switch to the position
02
to
turn on the headlights.
AUTOLIGHT SYSTEM (if so equipped)
The autolight system will automatically turn the headlights on when it is dark and off when it
is light. The system will keep the headlights on for a period of time after you turn the ignition
off and all doors are closed.
To activate the autolight system, turn the headlight control switch to the AUTO position 03
then push the ignition switch to ON. To deactivate the autolight system, turn the headlight
control switch to the OFF,
position 01
or position
02 .
HIGH BEAM SELECT
Push the headlight control switch forward
04
to
select the high beam function. The blue indicator
light
illuminates in the instrument panel. Pull the
headlight switch back to the original position to select
the low beam. The blue indicator light will extinguish.
Pull and release the headlight control switch 05
to
flash the headlight high beams on and off.
FOG LIGHT SWITCH (if so equipped)
The headlights must be on and the low beams
selected for the fog lights to operate.
Turn the switch (inside collar) to the position 06
to turn the fog lights on.
Turn the switch (inside collar) to the OFF position to turn the fog lights off.
LANE CHANGE SIGNAL
To signal a lane change, move the lever up or down to the point where the indicator light
begins to flash, but the lever does not latch.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
01
03
02
04 05
06
1591421_14d_Murano_QRG_012714b.indd 12 1/27/14 3:11 PM