Outside mirror control switch, Starting/stopping the engine – NISSAN 2014 Murano - Quick Reference Guide User Manual
Page 13

11
To view detailed instructional videos regarding these and other features,
please go to www.nissanownersinfo.mobi.
OUTSIDE MIRROR CONTROL SWITCH
To select the right or left side mirror, turn the control
switch
01
right or left.
To adjust the mirror angle, move the control switch up,
down, right or left.
To prevent accidentally moving the mirror, turn and set
the switch to the middle (neutral) position.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
01
STARTING/STOPPING THE ENGINE
It is important to make sure the NISSAN Intelligent
Key
®
is with you (that is, in your pocket or purse).
Depress the brake pedal.
Press the ignition switch START/STOP button to
start the engine.
TURNING THE ENGINE OFF
Move the shift lever to the P (PARK) position and
apply the parking brake.
Press the ignition switch START/STOP button to turn the engine off.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
04
05
06
PASSENGER’S SIDE
To fold down the front passenger’s seatback and
unlock the seat position, push the front passenger’s
seatback switch
04
.
Manually slide the seat to the forward most position.
Enter or exit the back seat.
To slide the front passenger’s seat back into position,
push the bottom half of the seatback
05
until it
locks. Next, adjust the seatback by pulling the
seatback lever
06
up. Release the lever to lock the
seatback into position.
For more information, refer to the “Safety – Seats, seat belts and
supplemental restraint system (section 1)” of your Owner’s Manual.
1591421_14d_Murano_QRG_012714b.indd 11
1/27/14 3:11 PM