Voice recognition -12, Voice recognition – NISSAN 2013 GT R - Multi Function Display Owner's Manual User Manual
Page 308
12-12
Troubleshooting guide
Symptom
Possible cause
Possible solution
The system does not accept
the voice command.
or
The system accepts the voice
command incorrectly.
The interior of the vehicle is too noisy.
Close the windows or have other occupants be quiet.
The volume of the voice is too low.
Speak louder.
The volume of the voice is too loud.
Speak softer.
Pronunciation is unclear.
Speak clearly.
The voice command is given before the voice recognition
system is ready.
Push <
> on the steering wheel, and speak a command after the tone
sounds.
8 seconds or more have passed after pushing <
> on the
steering wheel.
Make sure to speak a command within 8 seconds after the beep tone
sounds.
Only a limited range of voice commands is usable for each
screen.
Use a correct voice command appropriate for the current screen.
INFO:
For the best recognition, speak appropriate commands. Command lists are available earlier in this manual.
Standard Mode:
“Command List” (page 8-6)
Alternate Command Mode:
“Command List” (page 8-13)
VOICE RECOGNITION