NISSAN 2013 GT R - Multi Function Display Owner's Manual - Manual (Page 150)

3-22 Audio system
Connecting procedure
1. Push and select [Bluetooth].
2. Select [Connect Bluetooth].
3. A confirmation screen will be displayed.
Select [No].
Note: Selecting [Yes] will only connect the
hands free phone portion of a Bluetooth
®
device.
4. Choose a PIN code to use with the
compatible Bluetooth
®
audio device using
the number input screen. The PIN code will
need to be entered into the Bluetooth
®
audio device after step 5. Select [OK].
5. The standby message screen will appear.
Operate the compatible Bluetooth
®
audio
device. Please refer to the device’s owners
manual for the Bluetooth
®
audio connection
instructions for your specific device.
When the connection is completed, the
screen will return to the Bluetooth
®
setup
display.
Audio main operation
Push the ignition switch to the ACC or ON
position. Then, push repeatedly
to switch to the Bluetooth
®
audio mode. If the
system has been turned off while the Bluetooth
®
audio device was playing, pushing the ON·OFF/
VOL control knob will start the Bluetooth
®
audio
device.
The ability to pause, change tracks, fast forward,
rewind, randomize and repeat music may be
different between devices. Some or all of these
functions may not be supported on each device.