NISSAN 2013 Frontier - Owner's Manual - Manual (Page 386)

Tire and loading information label
᭺
1 Seating capacity: The maximum num-
ber of occupants that can be seated
in the vehicle.
᭺
2 Vehicle load limit: See loading infor-
mation in the “Technical and con-
sumer information” section.
᭺
3 Original tire size: The size of the tires
originally installed on the vehicle at
the factory.
᭺
4 Cold tire pressure: Inflate the tires to
this pressure when the tires are cold.
Tires are considered COLD after the
vehicle has been parked for 3 or more
hours, or driven less than 1 mile
(1.6 km) at moderate speeds. The
recommended cold tire inflation is set
by the manufacturer to provide the
best balance of tire wear, vehicle
handling, driveability, tire noise, etc.,
up to the vehicle’s GVWR.
᭺
5 Tire size - refer to “Tire labeling” later
in this section.
᭺
6 Spare tire size.
LDI2007
Maintenance and do-it-yourself 8-35