NISSAN 2013 Frontier - Owner's Manual User Manual

Page 240

USB INTERFACE (models without
Navigation System) (if so equipped)

Connecting a device to the USB input
jack

CAUTION

● Depending on size and shape of USB

device, the console lid may not fully
close. Do not force console lid closed
as this may damage USB device.

● Do not force the USB device into the

USB port. Inserting the USB device
tilted or up-side-down into the port may
damage the USB device and the port.
Make sure that the USB device is con-
nected correctly into the USB port.
(Some USB devices come with a
mark as a guide. Make sure that the
mark is facing the correct direction be-
fore inserting the device.)

● Do not locate objects near the USB de-

vice to prevent the objects from leaning
on the USB device and the port. Pres-
sure from the objects may damage the
USB device and the port.

The USB input jack is located inside the center
console

᭺

. Insert the USB device into the jack.

When a compatible storage device is plugged
into the jack, compatible audio files on the stor-
age device can be played through the vehicle’s
audio system.

Audio file operation

CD•AUX button:

Place the ignition switch in the ON or ACC
position and press the CD•AUX button to switch
to the USB input mode. If a CD is playing or
another audio source is plugged in through the

AUX IN jack on the radio, the CD•AUX button
toggles between the three sources.

Play information

Information about the audio files being played
can be displayed on the display screen of the
vehicle’s audio system. Depending on how the
audio files are encoded, information such as
Folder, Song and Artist will be displayed.

The track number and number of total tracks in
the folder are displayed on the screen as well.

SEEK/CAT (Reverse or

Fast Forward) buttons:

Press and hold the SEEK/CAT buttons
or

for 1.5 seconds while an audio file on

the USB device is playing to reverse or fast
forward the track being played. The track plays at
an increased speed while reversing or fast for-
warding. When the button is released, the audio
file returns to normal play speed.

SEEK/CAT buttons:

Press the SEEK/CAT button

while an au-

dio file on the USB device is playing to return to
the beginning of the current track. Press the
SEEK/CAT button

several times to skip

backward several tracks.

LHA2577

Monitor, climate, audio, phone and voice recognition systems

4-61