Caution – NISSAN 2014 Cube - Owner's Manual User Manual

Page 290

Replacing

Halogen headlight model:

The headlight is a semi-sealed beam type which
uses a replaceable headlight (halogen) bulb.

CAUTION

. Do not leave the bulb out of the

headlight reflector for a long period
of time. Dust, moisture, smoke, etc.
entering the headlight body may
affect bulb performance.

. High pressure halogen gas is sealed

inside the halogen bulb. The bulb
may break if the glass envelope is
scratched or the bulb is dropped.

. Only touch the base when handling

the bulb. Never touch the glass
envelope. Touching the glass envel-
ope could significantly affect bulb
life and/or headlight performance.

. Aiming is not necessary after repla-

cing the bulb. When aiming adjust-
ment is necessary, contact a
NISSAN dealer.

Use the same number and wattage as originally
installed as shown in the chart.

SDI2396

Disconnect the battery negative cable before
replacing bulbs.

1. Remove the connector

and the back

cover

2. Unlock the retaining spring

, and then

remove the bulb.

Maintenance and do-it-yourself

8-27