Lights – FORD 2002 Focus v.3 User Manual

Page 78

Lights

5. Locate the vertical adjuster on

each headlamp. Using a 7 mm Allen

head wrench, turn the adjuster

either clockwise (to adjust down)

or counterclockwise (to adjust up).

The high intensity area should

touch the horizontal reference line.
Note: HORIZONTAL AIM IS NOT

REQUIRED FOR THIS VEHICLE

AND IS NONĆADJUSTABLE.
6. Close the hood and turn off the

lamps.

VOL

On vehicles fitted with

VOL (HID) headlamps,

have your Ford Dealer change the

headlamp bulbs. There is a risk of

injury due to high voltage.

1. Park the vehicle on a level

surface approximately 7.6 meters

(25 feet) from a vertical wall or

screen directly in front of it.
2. Measure the height of the

headlamp bulb center from the

ground, subtract 53.3 mm

(2.1 inches), and make a 2.5 meters

(8 foot) horizontal reference line on

the vertical wall or screen at this

height. (A piece of masking tape

works well.)
3. Open the hood.
4. Remove the battery cover.