beautypg.com

Instrumentation – FORD 2002 Explorer v.3 User Manual

Page 22

background image

6. Release the reset control, then
slowly press down again.

7. Press the SETUP control
repeatedly until the correct zone
setting for your geographic location
is displayed on the message center. To exit the zone setting mode press
and release the RESET control.

8. Press the RESET control to start
the compass calibration function.

9. Slowly drive the vehicle in a
circle (less than 5 km/h [3 mph])
until the CIRCLE SLOWLY TO
CALIBRATE indicator changes to
CALIBRATION COMPLETED. This
will take up to three circles to complete calibration.

10. The compass is now calibrated.

AVERAGE FUEL ECONOMY (AFE)

Select this function from the INFO
menu to display your average fuel
economy in liters/100 km or
miles/gallon.

If you calculate your average fuel
economy by dividing liters of fuel used by 100 kilometers traveled (miles
traveled by gallons used), your figure may be different than displayed for
the following reasons:
• your vehicle was not perfectly level during fill-up
• differences in the automatic shut-off points on the fuel pumps at

service stations

• variations in top-off procedure from one fill-up to another
• rounding of the displayed values to the nearest 0.1 liter (gallon)
1. Drive the vehicle at least 8 km (5 miles) with the speed control
system engaged to display a stabilized average.

2. Record the highway fuel economy for future reference.

.

Instrumentation

22