beautypg.com

Roadside emergencies – FORD 2002 E-450 v.2 User Manual

Page 174

background image

3. Use the lug nut wrench to screw the lug nut snugly against the wheel.

4. Lower the vehicle by turning the jack handle counterclockwise.

5. Remove the jack and fully tighten the lug nuts in the following
pattern:
• 5-lug wheel

• 8-lug wheel

Never use wheels or lug
nuts different than the

original equipment as this could
damage the wheel or mounting
system. This damage could allow
the wheels to come off while the
vehicle is being driven.

6. Install any wheel covers, ornaments or hub caps. Make sure they are
screwed or snapped in place.

7. Stow the jack, handle and lug wrench.

8. Unblock the wheels.

On vehicles equipped with single rear wheels, retighten the lug nuts to
the specified torque at 800 km (500 miles) of operation after any wheel
change or any time the lug nuts are loosened.

On vehicles equipped with dual rear wheels, retighten the wheel lug nuts
to the specified torque at 160 km (100 miles), and again at 800 km
(500 miles) of new vehicle operation.

1

4

3

2

5

1

3

4

2

7

6

5

8

Roadside Emergencies

174

This manual is related to the following products: