FORD 2003 Mustang v.5 - Manual (Page 44)

Resuming a set speed
Press the RESUME
control and release it.
This will automatically
return the vehicle to
the previously set
speed. The RESUME
control will not work if
the vehicle speed is not
faster than 48 km/h (30 mph).
Increasing speed while using speed control
There are two ways to
set a higher speed:
• Press and hold the
SET ACCEL control
until you get to the
desired speed, then
release the control.
You can also use the
SET ACCEL control to operate the Tap-Up
function. Press and release this control to
increase the vehicle set speed in small amounts
by 1.6 km/h (1 mph).
• Use the accelerator pedal to get to the desired
speed. When the vehicle reaches that speed press
and release the SET ACCEL control.
Reducing speed while using speed control
There are two ways to
reduce a set speed:
• Press and hold the
COAST control until
you get to the desired
speed, then release
the control. You can
also use the COAST
control to operate the Tap-Down function. Press and
release this control to decrease the vehicle set speed
in small amounts by 1.6 km/h (1 mph).
RESUME
SET
ACCEL
COAST
RESUME
SET
ACCEL
COAST
RESUME
SET
ACCEL
COAST
2003 Mustang (mus)
Owners Guide (post-2002-fmt)
USA English (fus)
Driver Controls
44