FORD 2003 Mustang v.5 - Manual (Page 201)

Friction Modifier XL-3 or equivalent meeting Ford
specification EST-M2C118–A for complete refill of
Traction-Lok axles.
3 Ensure the correct automatic transmission fluid is
used. Transmission fluid requirements are indicated
on the dipstick or on the dipstick handle. MERCON
௡
and MERCON
௡ V are not interchangeable. DO NOT
mix MERCON
௡ and MERCON௡ V. Refer to your
scheduled maintenance guide to determine the
correct service interval.
4 Indicates only approximate dry-fill capacity. Some
applications may vary based on cooler size and if
equipped with an in-tank cooler. The amount of
transmission fluid and fluid level should be set by the
indication on the dipstick’s normal operating range.
5 Service refill capacity is determined by filling the
transmission to the bottom of the filler hole with the
vehicle on a level surface.
6 Use of synthetic or synthetic blend motor oil is not
mandatory. Engine oil need only meet the
requirements of Ford specification WSS-M2C153–H
and the API Certification mark.
LUBRICANT SPECIFICATIONS
Item Ford part
name Ford part
number Ford
specification
Brake fluid Motorcraft
High
Performance
DOT 3 Motor
Vehicle Brake
Fluid PM-1 ESA-M6C25-A
and DOT 3
Door
weatherstrips Silicone
Lubricant F5AZ-19553-AA ESR-M13P4-A
2003 Mustang (mus)
Owners Guide (post-2002-fmt)
USA English (fus)
Maintenance and Specifications
201