FORD 2003 F-550 v.1 - Manual (Page 97)

Manytether straps cannot be tightened if the tether strap is hooked to
the loop directlybehind the child seat. To provide a tight tether strap:
1. Route the tether strap through
the loop directlybehind the child
seat.
2. Attach the strap hook onto the
loop behind an adjacent seating
position.
3. Install the child safetyseat tightly
using the vehicle belts. Follow the
instructions in this chapter.
4. Tighten the tether strap
according to the child seat
manufacturer’s instructions.
A single loop can be used to route and anchor more than one child seat.
For example, the center loop can be used as a routing loop for a child
safetyseat in the center rear seat and as an anchoring loop for child
seats installed in the outboard rear seats.
Seating and Safety Restraints
97