FORD 2003 Explorer v.3 - Manual (Page 74)

LOW BRAKE FLUID LEVEL. Indicates the brake fluid level is low and
the brake system should be inspected immediately. Refer to Checking and
adding brake fluid in the Maintenance and specifications chapter.
LOW OIL PRESSURE. Displayed when the engine oil level is low. If
this warning message is displayed, check the level of the engine oil.
Refer to Engine oil in the Maintenance and specifications chapter for
information about adding engine oil.
WARNING-TIRE VERY LOW (if equipped). Displayed when one or
more tires have very low pressure. When this warning message is
displayed, a warning chime will sound reminding you to stop the vehicle
as soon as safely possible and check your tires for proper pressure, leaks
and damage. Refer to Servicing your tires in the Maintenance and
specifications chapter.
CHECK TIRE PRESSURE (if equipped). Displayed when any of the
tire pressures are low. Refer to Checking the tire pressure in the
Maintenance and specifications chapter.
CHECK SPARE TIRE PRESSURE (if equipped). Displayed when the
spare tire pressure is low. Refer to Checking the tire pressure in the
Maintenance and specifications chapter.
TIRE PRESSURE SYSTEM FAULT (if equipped). Displayed when the
Tire pressure monitoring system is malfunctioning. If the warning stays on
or continues to come on, have the system checked by your dealer.
TIRE PRESSURE SENSOR FAULT (if equipped). Displayed when a
Tire pressure sensor is malfunctioning. If the warning stays on or
continues to come on, have the system checked by your dealer.
LOW WASHER FLUID LEVEL. Indicates the washer fluid reservoir is
less than one quarter full. Check the washer fluid level. Refer to
Windshield washer fluid in the Maintenance and specifications chapter.
CHECK ADVANCETRAC
௢ (if equipped). Displayed when the
AdvanceTrac
௢ system is not operating properly. If this message is
displayed on the message center the AdvanceTrac
௢ system will be
partially operable. If this warning stays on while the engine is running,
contact your dealer for service as soon as possible. For further
information, refer to AdvanceTrac
௢ stability enhancement system in
the Driving chapter.
ADVTRAC OFF T/C ON. Displayed on 4x4 vehicles only when 4x4 Low
Range is selected. In this mode, the stability enhancement portion of the
AdvanceTrac
௢ is disabled, but the traction enhancement feature remains
enabled. For further information, refer to AdvanceTrac
௢ stability
enhancement system in the Driving chapter.
Driver Controls
74