beautypg.com

Driver controls – FORD 2003 Explorer v.3 User Manual

Page 60

background image

To vent:
To tilt the moon roof into the vent position (when the glass panel is
closed), press and hold the front portion of the control. To close the
moon roof from the vent position, press and hold the rear portion of the
control until the glass panel stops moving.
If the battery is disconnected, discharged, or a new battery is installed,
the moon roof needs to be opened to the vent position to reset the moon
roof positions.
The moon roof has a sliding shade that can be opened or closed when
the glass panel is shut. To close the shade, pull it toward the front of the
vehicle.

Do not let children play with the moon roof. They may seriously
hurt themselves.

HOMELINK

UNIVERSAL TRANSCEIVER (IF EQUIPPED)

The HomeLink

௡ Universal Transceiver, located on the overhead console,

provides a convenient way to replace up to three hand-held transmitters
with a single built-in device. This feature will learn the radio frequency
codes of most current transmitters to operate garage doors, entry gate
operators, security systems, entry door locks, and home or office lighting.

When programming your HomeLink

௡ Universal Transceiver to a

garage door or gate, be sure that people and objects are out of

the way to prevent potential harm or damage.

Do not use the HomeLink

௡ Universal Transceiver with any garage door

opener that lacks safety stop and reverse features as required by U.S.
federal safety standards (this includes any garage door opener model
manufactured before April 1, 1982). A garage door which cannot detect
an object, signaling the door to stop and reverse, does not meet current
U.S. federal safety standards. For more information, contact HomeLink

at: www.homelink.com or 1–800–355–3515.
Retain the original transmitter for use in other vehicles as well as for
future programming procedures (i.e. new HomeLink

௡ equipped vehicle

purchase). It is also suggested that upon the sale of the vehicle, the
programmed Homelink

௡ Universal Transceiver buttons be erased for

security purposes, refer to Programming in this section.

Programming

Do not program the HomeLink

Universal Transceiver with the

vehicle parked in the garage.

Driver Controls

60