beautypg.com

Maintenance and specifications – FORD 2003 Expedition v.3 User Manual

Page 315

background image

If an overfill occurs, excess fluid
should be removed by a qualified
technician.

An overfill condition of
transmission fluid may cause shift and/or engagement concerns
and/or possible damage.

Do not use supplemental transmission fluid additives, treatments or
cleaning agents. The use of these materials may affect transmission
operation and result in damage to internal transmission components.

DRIVELINE UNIVERSAL JOINT AND SLIP YOKE

Your vehicle may be equipped with universal joints that require
lubrication. Refer to the scheduled maintenance guide for maintenance
intervals. If the original universal joints are replaced with universal joints
equipped with grease fittings, lubrication will also be necessary.

AIR FILTER MAINTENANCE

Refer to the scheduled maintenance guide for the appropriate intervals
for changing the air filter element.

When changing the air filter element, use only the Motorcraft air filter
element listed. Refer to Motorcraft Part Numbers.

Note: Do not start your engine with the air cleaner removed and do not
remove it while the engine is running.

Changing the air filter element

1. Loosen the clamp that secures
the air inlet tube to the engine air
filter cover and disconnect the tube
from the cover.

ADD

COLD

HOT

DO NOT ADD

Maintenance and Specifications

315

This manual is related to the following products: