beautypg.com

Seating and safety restraints – FORD 2003 Expedition v.3 User Manual

Page 161

background image

To install climate controlled seat air filter:
• First, position the filter in it’s

housing making sure that the far
forward end is all the way up in
the housing. Then push in on the
center of the outside edge of the
filter and rotate up into the
housing until it clips into position.

REAR SEATS
Second row seats

Your vehicle’s second row outboard seating positions are equipped with
head restraints which are vertically adjustable. The purpose of these head
restraints is to help limit head motion in the event of a rear collision. To
properly adjust your head restraints, lift the head restraint so that it is
located directly behind your head or as close to that position as possible.

The head restraints can be raised by
lifting. To lower the head restraint,
press the release button.

If the head restraint becomes detached, replace the notched bar into the
bezel while holding the release button.

Second row folding seat system

Ensure that no objects such as books, purses or briefcases are on the
floor in front of the second row seats or on the seat cushion before
folding them down. Ensure that the head restraints are lowered.

Move the front passenger seat forward so that the second row seat
headrest clears the front seat.

Use caution when folding the seatback to the flat back position as
the system will move forward when you lift the release handle.

Seating and Safety Restraints

161

This manual is related to the following products: