beautypg.com

Setup menu, Language, Driver controls – FORD 2006 Taurus User Manual

Page 57

background image

6. Release the RESET control, then
slowly press RESET down again.

7. Press the SET control repeatedly
until the correct zone setting for
your geographic location is
displayed on the message center. To exit the zone setting mode press
and release the RESET control.

8. Press the RESET control to start
the compass calibration function.

9. Slowly drive the vehicle in a
circle (less than 3 mph [5 km/h])
until the CIRCLE SLOWLY TO
CALIBRATE indicator changes to
CALIBRATION COMPLETED. This
will take up to three circles to complete calibration.

10. The compass is now calibrated.

Setup menu

Press this control for the following
displays:
• Language
• Units (English/Metric)
• System Check

Language

1. Select this function from the
SETUP menu for the current
language to be displayed.

2006 Taurus (tau)
Owners Guide (post-2002-fmt)
USA
(fus)

Driver Controls

57