beautypg.com

Lights – FORD 2006 Freestar v.2 User Manual

Page 52

background image

2. Remove the two retainer pins to
release the headlamp assembly and
pull headlamp assembly forward to
expose the back of the bulb.

3. Disconnect the electrical
connector from the bulb by pulling
rearward and unlock the bulb by
rotating it counterclockwise.

Handle a halogen headlamp bulb carefully and keep out of
children’s reach. Grasp the bulb only by its plastic base and do

not touch the glass. The oil from your hand could cause the bulb to
break the next time the headlamps are operated.

Install the new bulb(s) in reverse order.

Replacing front parking/turn/sidemarker signal bulbs

1. Make sure the headlamp switch is in the OFF position and open the
hood.

2. Remove the two headlamp retaining pins to release the headlamp
assembly, then pull the headlamp assembly forward to expose the bulb
socket.

2006 Freestar (win)
Owners Guide (post-2002-fmt)
USA
(fus)

Lights

52