FORD 2006 Freestar v.2 - Manual (Page 106)

Unlocking and locking the doors using keyless entry
To unlock the driver’s door, enter the factory set 5-digit code or your
personal code. Each number must be pressed within five seconds of each
other. The keyless entry keypad will illuminate after pressing the first
control on the keypad.
To unlock all doors, press the 3
• 4 control within five seconds.
To lock all doors, press the 7
• 8 and the 9 • 0 at the same time. You
do not need to enter the keypad code first. Note: The interior lamps
will turn off.
To open (or close) the power sliding doors (if equipped), press the
5
• 6 control within five seconds to open (or close) the left power
sliding door or the 9
• 0 control in order to open (or close) the right
power sliding door.
Autolock
This feature automatically locks all vehicle doors when:
• all doors are closed,
• the ignition is in the 4 (ON) position,
• the brake is pressed before reaching 5 mph (8 km/h), and
• then the vehicle increases to more than 5 mph (8 km/h).
Relock
The autolock feature repeats when:
• an “autolock” occurrence has already taken place,
• the brake is depressed while vehicle speed is less than 5 mph (8
km/h),
• all vehicle doors become closed again, and
• then the vehicle increases to more than 5 mph (8 km/h).
Deactivating/activating the autolock feature
The autolock feature can be enabled or disabled by the keyless entry
keypad (if equipped) on your door, driver configuration mode or by your
authorized dealer.
2006 Freestar (win)
Owners Guide (post-2002-fmt)
USA (fus)
Locks and Security
106