beautypg.com

Parking brake, P! brake, Driving – FORD 2006 Freestar v.2 User Manual

Page 221

background image

Parking brake

To set the parking brake, pull the
handle up as far as possible. The
BRAKE warning lamp will illuminate
and will remain illuminated until the
parking brake is released.

To release, press and hold the
button, pull the handle up slightly,
then push the handle down.

Always set the parking
brake fully and make sure

that the gearshift is securely
latched in P (Park).

ADVANCETRAC

STABILITY ENHANCEMENT SYSTEM

(IF EQUIPPED)

The AdvanceTrac

௡ system helps the driver maintain the stability and

steer-ability of the vehicle. The system integrates anti-lock braking
system (ABS) and Traction Control

௢ and a more advanced function to

further enhance the stability of the vehicle.

AdvanceTrac

௡ constantly monitors the vehicle motion relative to the

driver’s intended course. This is done by using added sensors that
compare the steering inputs from the driver with the actual motion of
the vehicle. AdvanceTrac

௡ determines whether an engine torque

reduction or brake application is needed to help control the vehicle. If
the vehicle begins to rotate excessively left or right, spin out, or slide
sideways, the system will attempt to correct the excessive motion. If the
vehicle does not respond to steering inputs, the system will attempt to
increase the turning response of the vehicle.

AdvanceTrac

௡ enhances your vehicle’s stability during maneuvers that

require all available tire traction, like in wet/snowy/icy road conditions
and/or when performing emergency maneuvers. In an emergency
lane-change, the driver will experience better overall vehicle traction,
and have better control of the vehicle.

Driving conditions which may activate AdvanceTrac

௡ include:

• Accelerating on a slippery surface
• Taking a turn too fast

P

!

BRAKE

2006 Freestar (win)
Owners Guide (post-2002-fmt)
USA
(fus)

Driving

221