beautypg.com

Turn signal control, Lights – FORD 2006 Explorer v.2 User Manual

Page 51

background image

3. Turn on the low beam headlamps.
The brightest part of the light
should be below the horizontal line
(4). If it is above the line the
headlamp will need to be adjusted.

4. Open the hood.

5. Locate the vertical adjuster for
each headlamp. Adjust the aim by
turning the adjuster control either
clockwise (to adjust down) or
counterclockwise (to adjust up).

Note: Use a 4 mm socket or box
wrench to turn the vertical adjuster
control.

6. Horizontal aiming is not required
for this vehicle and is
non-adjustable.

TURN SIGNAL CONTROL
• Push down to activate the left

turn signal.

• Push up to activate the right turn

signal.

2006 Explorer (exp)
Owners Guide (post-2002-fmt)
USA
(fus)

Lights

51