FORD 2006 Explorer v.2 - Manual (Page 217)

The BRAKE warning lamp in the
instrument cluster illuminates and
remains illuminated (when the
ignition is turned ON) until the
parking brake is released.
Always set the parking brake fully and make sure that the
gearshift is securely latched in P (Park).
If the parking brake is fully released, but the brake warning lamp
remains illuminated, the brakes may not be working properly.
See your authorized dealer.
The parking brake is not recommended to stop a moving vehicle.
However, if the normal brakes fail, the parking brake can be used to stop
your vehicle in an emergency. Since the parking brake applies only the
rear brakes, the vehicle’s stopping distance will increase greatly and the
handling of your vehicle will be adversely affected.
Pull the release lever to release the
brake. Driving with the parking
brake on will cause the brakes to
wear out quickly and reduce fuel
economy.
ADVANCETRAC
ா WITH ROLL STABILITY CONTROLி (RSC)
STABILITY ENHANCEMENT SYSTEM
The AdvanceTrac
௡ with RSC system provides stability enhancement
features such as Roll Stability Control
௢ (RSC), Electronic Stability
Control (ESC) and Traction Control (TCS) for certain driving situations.
The system includes an AdvanceTrac
௡ with RSC on/off button, and a
“sliding car” icon in the instrument cluster.
P !
BRAKE
2006 Explorer (exp)
Owners Guide (post-2002-fmt)
USA (fus)
Driving
217