FORD 2007 Escape v.2 - Manual (Page 70)

To reset the oil monitoring system to 100% after each oil change
[approximately 5,000 miles (8,000 km) or 180 days] perform the
following:
1. Select this function from the
INFO menu then press the SET
control to access the system check
function.
2. Press and release the SET control
to display “OIL CHNG XXX% HOLD
SET NEW”.
3. Press and hold the SET control
for 2 seconds to display “OIL
CHANGE SET TO 100%”.
INFO UNAVAIL. These messages indicate improper operation of the
vehicle network communication systems for the following vehicle
modules.
• Fuel computer
• Charging system
• Door sensor
• Brakes
• Exterior lamps
• Emissions system
• 4WD info
Contact your Ford Dealer as soon as possible if these messages occur on
a regular basis.
2007 Escape (204)
Owners Guide (post-2002-fmt)
USA (fus)
Driver Controls
70