FORD 2010 Ranger v.2 - Manual (Page 261)

• 2.3L I4 engine
• 4.0L V6 engine
1. Start the engine and let it run until it reaches normal operating
temperature (the engine coolant temperature gauge indicator will be
near the center of the normal area between H and C).
2. While the engine idles, turn the steering wheel left and right several
times.
3. Turn the engine off.
4. Check the fluid level in the reservoir. It should be between the MIN
and MAX lines. Do not add fluid if the level is within this range.
5. If the fluid is low, add fluid in small amounts, until it reaches between
the MIN and MAX lines. Refer to Maintenance product specifications
and capacities in this chapter for the proper fluid type.
Maintenance and Specifications
261
2010 Ranger (ran)
Owners Guide, 2nd Printing
USA (fus)