Reverse, Parking your vehicle, Driving – FORD 2010 Ranger v.2 User Manual
Page 178
Upshifts when cruising (recommended for best fuel economy)
Shift from:
Transfer case position (if equipped)
2H or 4H
4L
1 - 2
10 mph (16 km/h)
4 mph (6 km/h)
2 - 3
19 mph (26 km/h)
8 mph (10 km/h)
3 - 4
28 mph (43 km/h)
12 mph (16 km/h)
4 - 5 (Overdrive)
40 mph (68 km/h)
16 mph (26 km/h)
Maximum downshift speeds
Shift from:
Transfer case position (if equipped)
2H or 4H
4L
5 (Overdrive) - 4
55 mph (88 km/h)
22 mph (34 km/h)
4 - 3
45 mph (72 km/h)
18 mph (27 km/h)
3 - 2
35 mph (56 km/h)
14 mph (21 km/h)
2 - 1
20 mph (32 km/h)
8 mph (11 km/h)
Reverse
1. Make sure that your vehicle is at
a complete stop before you shift
into R (Reverse). Failure to do so
may damage the transmission.
2. Move the gearshift lever into the
neutral position and wait at least
three seconds before shifting into R
(Reverse).
Note: The gearshift lever can only be moved into R (Reverse) by moving
it from left of 3 (Third) and 4 (Fourth) before shifting into R (Reverse).
This is a lockout feature that protects the transmission from accidentally
being shifted into R (Reverse) from 5 (Overdrive).
Parking your vehicle
1. Apply the brake and shift into the neutral position.
2. Fully apply the parking brake, then shift into 1 (First).
3. Turn the ignition off.
WARNING: Do not park your vehicle in Neutral, it may move
unexpectedly and injure someone. Use 1 (First) gear and set the
parking brake fully.
Driving
178
2010 Ranger (ran)
Owners Guide, 2nd Printing
USA (fus)