FORD 2010 Mustang v.1 - Manual (Page 82)

• If the vehicle speed increases above the set speed on a downhill, you
may want to apply the brakes to reduce the speed.
• If the vehicle speed decreases more than 10 mph (16 km/h) below
your set speed on an uphill, your speed control will disengage.
Disengaging speed control
To disengage the speed control:
• Tap the brake pedal or clutch pedal (if equipped)
Disengaging the speed control will not erase previous set speed.
Resuming a set speed
Base controls
Optional controls
Press the RES / RESUME control and release it. This will automatically
return the vehicle to the previously set speed.
Increasing speed while using speed control
Base controls
Optional controls
There are two ways to set a higher speed:
• Press and hold the SET (+) control until you get to the desired speed,
then release the control. You can also use the SET (+) control to
RES SET
RES SET
2010 05+ Mustang (197)
Owners Guide, 1st Printing
USA (fus)
Driver Controls
82