beautypg.com

Replacing interior bulbs, Replacing exterior bulbs, Replacing headlamp bulbs – FORD 2010 Expedition v.2 User Manual

Page 122: Lights

background image

Replacing interior bulbs

Check the operation of all bulbs frequently.

Replacing exterior bulbs

Check the operation of all the bulbs frequently.

Replacing headlamp bulbs

1. Make sure that the headlamp control is in the off position.

2. Open the hood.

3. At the back of the headlamp,
remove the two headlamp assembly
retainer bolts.

4. Slide headlamp assembly forward
and off the retaining tab to expose
the back of the bulb and electrical
connector.

5. Disconnect the electrical
connector.

6. Remove the bulb by turning it
counterclockwise and then pulling it
straight out.

WARNING: Handle a halogen headlamp bulb carefully and keep
out of children’s reach. Grasp the bulb only by its plastic base

and do not touch the glass. The oil from your hand could cause the
bulb to break the next time the headlamps are operated.

Lights

122

2010 Expedition (exd)
Owners Guide, 2nd Printing
USA
(fus)