beautypg.com

Upfitter controls (if equipped), Upfitter controls, Driver controls – FORD 2010 E-450 v.2 User Manual

Page 70

background image

Navigation system/SYNC

hands

free control features (if
equipped)

Press

control briefly until the

voice

icon appears on the

Navigation display to use the voice
command feature.

Press

to activate phone mode or answer a phone call. Press and

hold

to exit phone mode or end a call.

For further information on the Navigation system/SYNC

௡ system, refer to

the Navigation System and SYNC

௡ supplements.

UPFITTER CONTROLS (IF EQUIPPED)

Your vehicle may be equipped with
the Upfitter option package which
will provide four switches, mounted
in the center of the instrument
panel, labeled AUX 1, AUX 2, AUX 3
and AUX 4. These switches will only
operate while the ignition is in the
on position, whether the engine is
running or not. It is, however, recommended that the engine remain
running to maintain battery charge when using the Upfitter switches for
extended duration or higher current draws. (This is even more important
for vehicles with diesel engines since the glow plugs are also draining
battery power when the ignition key is in the on position.)

When switched on by the operator they provide 10 amps, 15 amps or
30 amps of electrical battery power for a variety of personal or
commercial uses.

If your vehicle is equipped with this option, a relay/fuse kit will be
included. This kit contains the required fuses and relays that need to be
installed into the Power Distribution Box located under the hood. Refer
to the instruction sketch included in the kit and Fuses and Relays in
the Roadside Emergencies chapter. See your authorized dealer for
service.

There will also be one power lead for each switch found as a blunt-cut
and sealed wire located in the underhood cowl shield above the engine
block PCM.

Driver Controls

70

2010 Econoline (eco)
Owners Guide, 2nd Printing
USA
(fus)

This manual is related to the following products: