FORD 2010 Crown Victoria v.2 - Manual (Page 18)

Engine coolant temperature
gauge: Indicates engine coolant
temperature. At normal operating
temperature, the needle will be in
the normal range (between “H” and
“C”). If it enters the red section,
the engine is overheating. Stop
the vehicle as soon as safely
possible, switch off the engine and let the engine cool.
WARNING: Never remove the coolant reservoir cap while the
engine is running or hot.
Odometer: Registers the total miles (kilometers) of the vehicle.
• Without Message center
To switch the display from Metric to
English, press and hold the button
on the cluster for three seconds.
• With Message center
Refer to Message center in this
chapter on how to switch the
display from Metric to English and
the odometer to the speedometer.
Trip odometer: Registers the miles (kilometers) of individual journeys.
• Without message center
Press and release the button on the
cluster to switch between odometer
and trip odometer display. To reset,
press the button again until the trip
reading is 000000.0 miles.
Instrument Cluster
18
2010 Crown Victoria (cro)
Owners Guide, 2nd Printing
USA (fus)