FORD 2011 F-150 v.2 - Manual (Page 340)

9. Remove the jack and fully tighten
the lug nuts in the order shown
(Refer to Wheel lug nut torque
specifications later in this chapter
for the proper lug nut torque
specification):
• Six lug nut wheel
• Seven lug nut wheel
10. Stow the flat tire. Refer to Stowing the flat/spare tire.
11. Stow the jack and lug wrench. Make sure the jack is fastened so it
does not rattle when you drive.
12. Unblock the wheels.
Stowing the flat/spare tire
Note: Failure to follow spare tire stowage instructions may result in
failure of cable or loss of spare tire.
1. Lay the tire on the ground with the valve stem facing in the direction
specified on the Tire Changing Instructions located with the jack
hardware.
2. Slide the wheel partially under the vehicle and install the retainer
through the wheel center. Pull on the cable to align the components at
the end of the cable.
Roadside Emergencies
340
2011 F-150 (f12)
Owners Guide, 2nd Printing
USA (fus)