FORD 2011 F-150 v.2 - Manual (Page 284)

Switching off AdvanceTrac
௡ with RSC௡
If the vehicle is stuck in snow, mud or sand, and seems to lose engine
power, switching off certain features of the AdvanceTrac
௡ with RSC௡
system may be beneficial because the wheels are allowed to spin. This
will restore full engine power and will enhance momentum through the
obstacle.
To switch off certain features of the AdvanceTrac
௡ with RSC௡ system,
press the stability control button. Full features of the AdvanceTrac
௡ with
RSC
௡ system can be restored by pressing the button again or by turning
off and restarting the engine.
If you switch off the AdvanceTrac
௡ with RSC௡ system, the stability
control off light will illuminate steadily. Pressing the stability control
button again will turn off the stability control off light.
In R (Reverse), ABS and the engine traction control and brake traction
control features will continue to function; however, ESC and RSC
௡ are
disabled.
AdvanceTrac
௡ with RSC௡ Features
Button
functions
Stability
control OFF
light
RSC
௡
ESC TCS
Default at
start-up
Illuminated
during bulb
check
Enabled Enabled Enabled
Button pressed
momentarily Illuminated
solid
Enabled Enabled 1 Disabled 1
Button pressed
and held for
more than
5 seconds at
vehicle speed
under 35 mph
(56 km/h)
Flashes then
illuminated
solid 2
Disabled Disabled Disabled 4
Vehicle speed
exceeds 35 mph
(56 km/h) after
button is
pressed and
held for more
than 5 seconds
Illuminated
solid
Enabled Enabled 1 Disabled 1
Driving
284
2011 F-150 (f12)
Owners Guide, 2nd Printing
USA (fus)