FORD 2011 Escape Hybrid v.2 - Manual (Page 52)

DUAL AUTOMATIC TEMPERATURE CONTROL
1. AUTO/Driver temperature: Press to engage full automatic
operation. The system will automatically determine fan speed, airflow
distribution, A/C on or off, and outside or recirculated air, to heat or cool
the vehicle to reach the desired temperature. Turn to increase/decrease
the temperature on the driver side of the vehicle. The control also
adjusts the passenger side temperature when PASS TEMP is disengaged.
The recommended initial setting is between 72°F (22°C) and 75°F
(24°C), then adjust for comfort. The driver side temperature setting will
appear in the upper left corner of the display.
2. R Rear defroster: Press to activate/deactivate the rear window
defroster. Refer to Rear window defroster later in this chapter for more
information.
3. Defrost: Distributes outside air through the windshield defroster
vents and demister vents. Can be used to clear the windshield of fog and
thin ice. The system will automatically provide outside air to reduce
window fogging. Press this button again to return to the previous air flow
selection or press AUTO to return to full automatic control.
4. Defrost/Floor: Distributes air through the windshield defroster
vents, demister vents, floor vents and rear seat floor vents. The system
will automatically provide outside air to reduce window fogging. To
return to full automatic control, press AUTO.
Climate Controls
52
2011 Escape Hybrid (ehv)
Owners Guide, 2nd Printing
USA (fus)