Locks and security – FORD 2012 Taurus v.2 User Manual
Page 111
Note: For all vehicles with remote start installed, it is possible to
program all ’real’ keys as MyKeys
, in which case, you will need to use
your remote start system to reset all MyKeys
as admin keys by doing
the following:
1. Enter the vehicle, close all doors.
2. Remote start the vehicle using your remote start fob.
3. Follow Steps 1-4 in the Clear MyKey
section.
Troubleshooting
Condition
Potential Causes
Can’t create a MyKey
• Key in the ignition is already a
MyKey
.
• Key in the ignition is the last
remaining admin key (there always has
to be at least one admin key).
• Intelligent access key (if equipped)
not in the backup slot — for vehicles
with push button start.
•SecuriLock Passive Anti-Theft System
is disabled or in unlimited mode.
• Vehicle has been started using a
remote start system that is programmed
as MyKey
. Refer to Using MyKey
with remote start systems section.
Cannot program the MyKey
optional settings
• Key in the ignition is a MyKey
• No MyKeys are programmed to the
vehicle. Refer to Create a MyKey
section.
• Vehicle has been started using a
remote start system that is programmed
as a MyKey
. Refer to Using MyKey
with remote start systems section.
Cannot clear MyKey
• Key in the ignition is a MyKey
• No MyKeys are programmed to the
vehicle. Refer to Create a MyKey
section.
• Vehicle has been started using a
remote start system that is programmed
as a MyKey
. Refer to MyKey with
remote start systems section.
Locks and Security
111
2012 Taurus
Owners Guide, 2nd Printing
USA (fus)