FORD 2012 Shelby GT 500 v.2 - Manual (Page 23)

AMBIENT DIM
Use this to adjust the brightness of the ambient lighting.
Press RESET to choose the various settings.
GAUGE COLOR, AMBIENT COLOR, HALO COLOR
GAUGE COLOR: The instrument cluster gauges are backlit with white
backlighting when the headlamps are off. When the headlamps are on, you
can select one of the preset colors for the nighttime gauge backlighting or
create up to three custom colors using the MyColor
௡ feature.
Note: A gauge in a warning condition will be lit red when the headlamps
are on.
AMBIENT COLOR: You can select one of the preset colors for ambient
lighting or create up to three custom colors using the MyColor
௡ feature.
HALO COLOR: You can select one of the preset colors for halo lighting
or create up to three custom colors using the MyColor
௡ feature.
Note: Headlamps or parking lamps must be on to set up colors.
To choose colors for the gauges, halo color or ambient lighting do the
following:
1. Press SETUP to reach the GAUGE COLOR, AMBIENT COLOR, or
HALO COLOR menu.
2. Press RESET to scroll through the following color options:
•ICE BLUE •BLUE
•WHITE •ORANGE
•GREEN •RED
•PURPLE •MYCOLOR 1, 2, 3 (See HOLD
RESET TO SET MY COLOR 1, 2,
3 following, to save personalized
color combinations)
HOLD RESET TO SET MYCOLOR 1, 2, 3 (Saving your own colors)
Apart from the preset colors, you can create your own color by adjusting
the levels of the three primary colors (red, green, and blue) through the
MyColor
௡ feature to achieve any of 125 different combinations. You can
save up to three custom colors in MyColor
௡.
To enter the MyColor
௡ adjust mode, do the following (vehicle must be
stationary):
1. Press and hold RESET for three seconds at the MyColor 1, 2 or 3
menu option to reach the MyColor
௡ adjust mode.
Instrument Cluster
23
2012 05+ Mustang (197)
Owners Guide, 2nd Printing
USA (fus)