Instrument cluster – FORD 2012 Shelby GT 500 v.2 User Manual
Page 22
OIL LIFE
This displays the remaining oil life.
An oil change is required whenever indicated by the message center and
according to the recommended maintenance schedule. USE ONLY
RECOMMENDED ENGINE OILS.
To reset the oil monitoring system to 100% after each oil change perform
the following:
1. Press and release SETUP to display “OIL LIFE XXX% HOLD RESET =
NEW”.
2. Press and hold RESET for two seconds and release to reset the oil life
to 100%.
STEERING FEEL
This feature allows three modes of steering feel.
Press RESET to cycle through the settings of:
• STANDARD– Provides a balance between a comfort and sport feel.
• SPORT– Slightly higher effort required for steering with more road
force felt through the steering wheel. See note below.
• COMFORT– Slightly less effort required for steering with less road
force felt through the steering wheel.
Note: When AdvanceTrac
sport mode is on or when AdvanceTrac and
traction control are off, the steering feel will be locked in sport mode.
The display will show STEERING FEEL
steering feel will not be selectable.
See AdvanceTrac
stability enhancement system and Steering in the
Driving chapter for more information.
HALO LIGHT
Turns the halo lighting around the gauges on or off.
Press and hold RESET to turn the feature on or off.
AMBIENT LIGHT
Turns the ambient lighting on or off. Ambient lighting provides accent
lighting in various locations such as footwell areas, cup holders and the
center console bin. The parking lamps/headlamps must be on to use
ambient lighting.
Press and hold RESET to turn the feature on or off.
Instrument Cluster
22
2012 05+ Mustang (197)
Owners Guide, 2nd Printing
USA (fus)